PING S57 irons custom-fit report

Regular readers of my irregular blog will know I recently went up to Ping HQ in Gainsborough and had a fitting for the Ping Rapture V2 driver and very well it’s been performing too.

PING Rapture V2 driver video review
Ping Rapture V2 driver Golf Monthly review

At the same time as the driver fit Julian Clay, Ping’s fitting guru, also ran me through a fitting for a set of Ping S57 irons. As with the driver, I wasn’t actively looking to change from my MacGregor MT Pro irons that I’d been very happy with since putting in the bag in February. However, with such a lot of good kit on the market and the effect a proper custom-fitting can have (the MacGregor’s were not fitted), a man must have an open mind to these things.


Ping S57 irons – Golf Monthly review

From the word go I liked the look of the S57s. They were a shallow enough of a cavity not to look too different from the RAC TPs and the cavity backed irons (4,5,6) in the MacGregor set. The top line was just right and the amount of offset perfect. 

With the looks sorted it was on to specs. Julian quickly found out I needed my irons 1 degree flat. I already knew this but had not had my last two sets (TaylorMade RAC TP Forged before the MacGregors) adjusted as neither were custom-fitted to start with, and becuse I’d been

hitting them as well as I ever hit my irons.

OK but could be

better especially in the longer irons which has always been my weak

spot.

But, where Julian really showed his expertise was in getting the right shaft for me. I’m quite difficult to fit because for me its as almost as much about how the club feels as to the numbers on the launch monitor. Just because the ball is going straighter and longer, I’m not immediately sold. I’m difficult, I know.

My last two sets have had stiff flex Nippon NS Pros in – 850s in the RAC TPs and 1150s in the MTs. The former was too probably too light and the later too heavy. Flex wise the Nippons have been great for me because their stiffs come out slightly softer than say a Dynamic Gold stiff that I have always struggled to work with.

We started off by looking at the Ping AWT shafts (almost the same weight as a Nippon 1050s) and using a process called “step to soften” where the 9 iron is fitted with an 8 iron shaft and so on to make them play a bit softer and although flight and dispersion were good (certainly better than the MacGregors) they just didn’t feel the same as the Nippons! In the end we opted for the Nippon 1050s, fitted with Golf Pride Multi Compound grips.

The result? There’s no discernible loss of feedback from the S57s being a cast club (as opposed to forged like my last two sets) which I must confess to having worried about and, more importantly, I’m hitting them about a club and half longer with a lot more forgiveness.

One of the most noticeable benefits has been me getting the four iron out on a much more regular basis. Before it was a club for the 185-195 yard shots, but only when I was feeling confident. Anything more, or if I wasn’t feeling right and I was straight to the utility either choking down on it or trying to hit it soft, neither of which were ideal.

Just how long and accurately I’m hitting the 4 iron was underlined at the recent Challenge Golf Monthly match vs Northamptonshire County where I teamed up with Jezz Ellwood to dish out a 6&5 beating to our opposing pair. 

Jezz and I were having little £1 a hole longest drive side bet and after he finally nudged one past me (mine was off the bottom and his was his Sunday best) on the 11th I had 198 to the front with the stick on about 10. I could see Jezz looking puzzled when I reached for an iron and even more quizzical when I got it on pin high. Predictably the old boy tried to match me but from 10 yards closer came up short. 

As a result of the S57s switch, my line-up has had somewhat of a makeover recently. So, as we speak here’s What’s In The Bag

Driver: PING Rapture V2, 10. 5 degrees Mitsubishi Diamana BlueBoard regular shaft

Fairway: PING G10 4wood. 17 degrees. PING TFC stiff shaft

Utility: Titleist 585H. 19 degrees. Graphite Design YS6 hybrid stiff shaft

Irons: PING S57 4-W Nippon NS Pro 1050 stiff shafts

Wedges: Crews T310 51 deg loft/8 deg bounce, PING Tour W 56deg/12 deg bounce and PING Tour W 60deg/8 deg bounce

Putter: Scotty Cameron Studio Select. 34 inches

Ball: TaylorMade TP Black LDP

This could be subject to change on the driver front though as I am trialling a TaylorMade Tour Burner and an R7 Limited. How did this happen when you were so happy with the Rapture V2 I hear you ask? Well that’s a story for another time…

Ping S57 irons – Golf Monthly review
Ping Rapture V2 driver video review
Ping Rapture V2 driver Golf Monthly review